Automatic Programming of Ziegler-Nichols and Strejc Methods based on Opened Loop Response

Authors

  • Jean Nirinarison Razafinjakaa University of Antsiranana, 201-BP O, Madagascar Author
  • Andrianantenaina Tsiory Patricka University of Antsiranana, 201-BP O, Madagascar Author
  • Andriamanjakony Holiarimanga Mariette University of Antsiranana, 201-BP O, Madagascar Author
  • Linda Christelle Mevalaza University of Antsiranana, 201-BP O, Madagascar Author

DOI:

https://doi.org/10.14741/ijmcr/v.12.6.1

Keywords:

Pid Controller, Identification, Design, Ziegler-Nichols, Strejc, Programming.

Abstract

This paper is specially reserved for non-oscillatory response system. It is based on the opened loop response of the system. The principal objectives are to identify the system by its transfer function and to design the adequate controllers. For this purpose, a program is worked out to detects automatically, from measurements, the nature of the system: with new stationary state (SSNE) or with integral behavior (SIB) and to find the adequate controllers. Moreover, the methods of Ziegler - Nichols and of Strejc show a great similarity and can be combined in only one program. The results are very satisfactory and the program can be applied on real site by using, for example, LabView provided with its peripheral NI 6009

Downloads

Download data is not yet available.

Downloads

Published

12-11-2024

Issue

Vol. 12 No. 6 (2024)

Section

Articles

How to Cite

Automatic Programming of Ziegler-Nichols and Strejc Methods based on Opened Loop Response. (2024). International Journal of Multidisciplinary and Current Research, 12(6), 600-605. https://doi.org/10.14741/ijmcr/v.12.6.1

Share